Customer Requirements Definition

Quick Ship Samples
Reduce tiME-TO-mARKET

SELECT
[ Good ]

Select Samples are existing products selected by the customer using RevAir Select. They are built and shipped quickly.

ENGINEERED
[ Better ]

Engineered Samples are existing products specified by Revcor engineers that are built and shipped quickly.

CUSTOM
[ Best ]

Custom Samples are new products configured by Revcor engineers from existing components that are built and shipped quickly. 

Customized Airflow Projects
Achieve competitive advantage

IMPROVE
[ Good ]

Revcor engineers specify the best sample, build, and test it directly in your airflow-dependent OEM Unit to improve its performance.

OPTIMIZE
[ Better ]

Revcor engineers utilize the Improve Project test results to specify, build, and test additional samples until the OEM Unit’s airflow performance has been optimized.

DESIGN
[ Best ]

Revcor engineers design a new Prototype that can be tested directly in the customer-supplied airflow-dependent OEM Unit being developed to maximize its performance.

Revolutionary Airflow Solutions Comparison Table

The following Revolutionary Airflow Solutions Table summarizes our 6 levels of support to help you decide which path is right for the OEM Product challenges you face. Let’s discuss which option is best for you.

blank
blank

Select Samples are existing Revcor products selected & tested by our customers. If you prefer to “Do It Yourself” (DIY), we offer access to our powerful RevAir Select product selection software.

Customer testing of our Select Samples in your OEM Units for efficiency, sound, and structural integrity must be verified to ensure technical specifications are achieved and to minimize the risk of costly field failures.

Most customers prefer to have one of our experienced engineers select the best sample or, better yet, test the selected sample directly in your OEM Unit. Revcor’s proprietary testing in our airflow-specific labs assures you that the best sample is selected for your OEM Unit throughout its useful life.

Either way, let’s:

blank

Engineered Samples are existing Revcor products specified by one of our engineers to achieve your OEM Unit’s performance requirements. Engineered Samples are specified based on customer-supplied operating parameters rather than in-unit testing by Revcor.

The customer must still test performance, sound, and structural integrity. That’s why most of our customers upgrade to one of our Customized Airflow Projects, where our team of engineers specifies, builds, and tests the fan blade, blower wheel, or blower assembly to ensure it achieves the required performance, sound, and structural integrity of your OEM Units.

blank

Custom Samples are new products configured by one of our engineers to achieve your OEM Unit’s performance based on customer-supplied operating parameters.

Custom Samples are configured from our broad selection of tooled components when an Engineered Sample will not achieve your OEM Unit’s required performance. To avoid costly field failures, the customer is still responsible for in-unit performance, sound, and structural integrity testing.

blank

Our Application Engineers specify the best sample to achieve the performance your OEM Unit requires. We build the sample and perform the baseline testing directly in your supplied OEM unit to verify its performance.

All of our proprietary test protocols are conducted in our dedicated airflow-specific labs. All test results are documented and provided to quantify your OEM Unit’s performance.

blank

Suppose the baseline test results from an Improve Project confirm that the specified sample does not deliver the performance your airflow-dependent system requires. In that case, our engineers will specify additional samples. The new samples will be built and tested until the airflow performance of your OEM Unit has been optimized.

Using the same proprietary test protocols in our dedicated airflow-specific labs, our engineers assure that your performance, sound, and structural integrity requirements are achieved. Reports are generated that quantify the results of your OEM Unit’s performance.

blank

Are you developing a new airflow-dependent OEM unit and want to ensure you apply the most efficient, quietest, and structurally sound fan blade, blower wheel, or blower assembly?

Design Projects require more time, effort, and cost. However, engaging us early within your new product development process results in optimized performance, shortened in lead time, and minimizes the total project cost.

Revcor has the engineering, sourcing, and manufacturing expertise to ensure that your new impeller’s design, development, tooling, launch, production, and delivery are done on time and within budget.

We still use the same proprietary test protocols in our dedicated airflow-specific labs to ensure that your performance, sound, and structural integrity requirements are achieved. Reports are generated that quantify the results of your OEM Unit’s performance.

Increase Efficiency

Gain competitive advantage and/or achieve government mandated efficiency standards by increasing airflow efficiency (i.e.  system CFM/Watt)

blank

Custom Sample

Custom Samples are new products configured by one of our Application Engineers to achieve, or improve your OEM Product’s performance.

Custom Samples are still configured based on the customer supplied operating parameters, rather than in-unit testing by Revcor. The customer is still responsible for testing performance, sound and structural integrity to avoid costly field failures.

blank

Standard Sample

Standard Samples are existing Revcor products selected & tested by our customers. Customer testing of our Standard Samples in their OEM Products is their responsibility. Efficiency, sound and structural integrity must be verified to assure technical specifications are achieved and to minimize the risk of costly field failures.

If you’re a Do It Yourselfer (DIY) and want to select your own Standard Samples, we offer access to our powerful RevAir Select product selection software.

However, most customers prefer to have one of our experienced airflow engineers select the best sample, or better yet, test the selected samples directly in your OEM Products. Revcor’s proprietary testing in our airflow specific labs assures you that the best sample is selected to optimize the performance of your OEM Product throughout its useful life.

Either way, let’s: